- A Pot-box or potentiometer box may be the device that can physically connect with your accelerator pedal through accelerator pedal cable. It provides a spring-loaded arm that is activated by stepping about the accelerator pedal allowing more or less current through to the motor controller and tells the motor controller how much power to send towards the motor for acceleration.
- A relay is a computer device which uses a small control voltage such as 12 volts, to manage a bigger system voltage such as 120 volts. A relay (non solid state) has a magnetic coil that if activated pulls a set of contacts closed and allows current to flow around the larger voltage side of the relay. This will make it possible to have smaller control wires at the key switch the signal from operate the vehicle along with a safe voltage within the cab with the electric vehicle. Relays would typically be employed to control the hollywood systems with the vehicle including the main contactor or heater core.
- An inertia switch is a safety switch built to cut capacity to the automobile if it is involved in an accident. It really is typically mounted near the front with the vehicle when impact occurs the shaking of the inertia switch releases a magnetically held set of contacts shutting off of the power to the automobile. In certain countries this is a requirement for any electric vehicle conversion.
REFERENCES:
http://www.fivestararticles.com/Article/The-Value-Of-Tehnology-In-Today-s-Modern-Time/194707
http://www.free-article-depot.com/Art/551324/215/The-Necessity-Of-Tehnology-In-Today-s-Modern-Time.html
http://www.newagelivingarticles.com/Art/188827/94/The-Significance-Of-Tehnology-In-Today-s-Modern-Time.html